Split-core residual current transformers

Residual current transformer

TP58 WGC

TP58 WGC, Residual current transformer

Code: P11121.

  • Usefull diam.(mm): 80 x 50
  • IΔn (A): acc. relay > 0,3A
  • IΔn min.(A): 0.3

INFORMATION

Description

The TP-WGC series features split-core residual current transformers for the residual current protection of electrical installations or machines. These transformers are used to control and monitor the leakage currents of an electrical installation and are recommended as a temporary solution for punctual residual current protection in parts of the electrical installation that are finished but, due to an error or lack of foresight, do not have the normal protection installed.

TP-WGC transformers have been designed for installation inside an electrical panel or enclosure, mounted with screws or cable ties, facilitating their installation in existing installations.

The residual current transformers of the TP-WGC series have been designed to operate with the relays of the WGC series. The sensitivity (trip current) of the transformer-relay assembly is established by the associated relay. The relays associated with the TP-WGC transformer must be programmed with a minimum sensitivity of 300 mA for residual current protection.

Do you need more information about this product?

If you have any questions, let's talk.

Talk to a specialist

SPECIFICATIONS

AC power supply, insulation
Pulse test (kV)
3 kV
AC power supply
Frequency
45 … 60 Hz
Environmental characteristics
Protection class
IP 20 (Terminals) IEC 60529
Relative humidity (without condensation)
95%
Working temperature
-10 … +50 ºC
Mechanical characteristics
Envelope
Self-extinguishing polycarbonate UL 94 V0
Weight (kg)
0,8
Current measurement circuit
Phase current measuring range
0,250 … 30 A (residuum)
Dynamic current (Idyn)
4,5 kA / 40 ms
Permanent thermal current (Icth)
40 A
Thermal short-circuit current (Ith)
1,8 kA / 1s
Transformation ratio
30 / 0,06 A
Maximum operating voltage (Um)
720 V
Standards
Electrical safety, Maximum height (m)
2000
Electrical safety, Installation category
CAT III 300V ca
Standards
IEC 60529
Measurement accuracy
Accuracy
± 15 %

DIMENSIÓN

VÍDEOS

DESCARGAS

Datasheet
Catalogue

ACCESORIOS

TAMBIÉN TE PUEDE INTERESAR

Residual current relay, type A, for ultra-immunised WGC Transformer, 3 modules with display and programmable pre-alarm output.

RGU-10

Residual current relay, type A, for ultra-immunised WGC Transformer, 3 modules with display and programmable pre-alarm output.

Residual current transformer

WGC

Residual current transformer