Residual current transformer

WGC-500x200

WGC-500x200, Residual current transformer

Code: P10160.

  • Usefull diam.(mm): 500 x 200
  • Cable (m): 0
  • Max. Current (A): 4000

INFORMATION

Description

This new range features a series of improvements intended in particular for installing units on switchboards. Along with the usual attachment elements, this unit can be installed on DIN rails using an accessory, which facilitates its installation.

The residual current transformers of the WGC series offer better immunity to the transient current spikes that usually trigger the residual current protection. The residual current transformers of the WGC series have been designed to operate with the relays of the WGC series. The sensitivity (trip current) of the transformer-relay assembly is established by the associated relay.

SPECIFICATIONS

AC power supply, insulation
Pulse test (kV)
3 kV
Mechanical characteristics
Size (mm) width x height x depth
614 x 306 x 64 (mm)
Envelope
Self-extinguishing polycarbonate UL 94 V0
Fastening
DIN rail with accessory
Connection type
Screw terminal (Pz type)
Weight (kg)
11
Environmental characteristics
Protection class
IP 20 (Terminals) IEC 60529
Relative humidity (without condensation)
5 ... 95 %
Working temperature
-20 ... + 70 ºC
Current measurement circuit
Dynamic current (Idyn)
2,5 Ith
Permanent thermal current (Icth)
60 A
Thermal short-circuit current (Ith)
1,8 kA / 1s
Transformation ratio
30 / 0,06 A
Maximum operating voltage (Um)
720 V
Standards
Electrical safety, Maximum height (m)
2000
Electrical safety, Installation category
CAT III
Standards
IEC 60664-1, IEC 60664-3, IEC 60044-1
Measurement accuracy
Accuracy
10 … 15 %

DIMENSIONS

CONNECTIONS

VIDEOS

DOWNLOADS

Technical guide
Dimensions
Datasheet
Catalogue
Leaflet
Other Certificates

ACCESORIES