Residual current transformer

WGC-80

WGC-80, Residual current transformer

Code: P10154.

  • Usefull diam.(mm): 80
  • Cable (m): 0
  • Max. Current (A): 250

INFORMATION

Description

This new range features a series of improvements intended in particular for installing units on switchboards. Along with the usual attachment elements, this unit can be installed on DIN rails using an accessory, which facilitates its installation.

The residual current transformers of the WGC series offer better immunity to the transient current spikes that usually trigger the residual current protection. The residual current transformers of the WGC series have been designed to operate with the relays of the WGC series. The sensitivity (trip current) of the transformer-relay assembly is established by the associated relay.

SPECIFICATIONS

AC power supply, insulation
Pulse test (kV)
3 kV
Current measurement circuit
Transformation ratio
30 / 0,06 A
Maximum operating voltage (Um)
720 V
Dynamic current (Idyn)
2,5 Ith
Thermal short-circuit current (Ith)
1,8 kA / 1s
Permanent thermal current (Icth)
60 A
Measurement accuracy
Accuracy
10 … 15 %
Environmental characteristics
Working temperature
-20 ... + 70 ºC
Relative humidity (without condensation)
5 ... 95 %
Protection class
IP 20 (Terminals) IEC 60529
Mechanical characteristics
Envelope
Self-extinguishing polycarbonate UL 94 V0
Fastening
DIN rail with accessory (see code)
Connection type
Screw terminal (Pz type)
Weight (kg)
0,288
Size (mm) width x height x depth
124.5 x 130 x 50 (mm)
Standards
Standards
IEC 60664-1, IEC 60664-3, IEC 60044-1
Electrical safety, Installation category
CAT III
Electrical safety, Maximum height (m)
2000

DIMENSIONS

CONNECTIONS

VIDEOS

DOWNLOADS

Technical guide
3D
Dimensions
Datasheet
CE-certified
Other Certificates
Catalogue
Leaflet

ACCESORIES