Harmonic filters

LRZ 04-050

LRZ 04-050, Reactor

Code: P7330B.

  • L(mH): 0,67
  • In (A): 47
  • Losses: 64
  • Motor P.: 22
  • Motor P. (CV): 30

INFORMATION

Description

The motor speed regulation equipment, frequency variators, UPS units, etc. generate alterations in the network, which affect other loads in the installation of the operation of the equipment.
The LRZ / LRBZ reactors connected to the input on the network side of the equipment can attenuate voltage peaks and reduce the harmonic distortion generated by the power electronics. The LRZ / LRBZ Reactors for filtering can reduce the current harmonics in any converter from 40... 50 % to values around 20 %. In addition, they reduce the shortcircuit current and increase the safety of the converter's semi-conductors. When installed on the motor side, they can attenuate harmonic frequencies caused during switching operations.

  • Low-powered reactors, LRZ type, are built with plates with low losses and are coiled with copper wire. The connection is achieved with the adequate terminals.
  • In the case of higher currents, LRBZ reactors are used, with a magnetic plate nucleus and multiple steel cores, which offer excellent characteristics and a low loss ratio. Copper band coils (or aluminium band, on demand). The connections run through a plate.
  • Both LRZ and LRBZ type reactors have a vacuum varnish sealing to increase the insulation, providing a greater mechanical resistance and reduce the level of noise.

Applications

The reactors of the LR / LRB series are prepared and can be used on the network and motor sides. They attenuate micro-drops and peaks during the initial connection and switching operations, and they reduce the rate of harmonics from the network current.

SPECIFICATIONS

Electrical characteristics
Voltage
up to 1000 V~
Insulation voltage, circuit
4 kV
L value (mH)
0.67
Linearity (5% L)
1,5 In
Maximum transient current
2 In (1 min)
Current measurement circuit
Nominal current (In)
According to table. Other values on request
Allowable overload
1,7 In
Permanent overload
1,7 In
Environmental characteristics
Thermal Class
"class F (+155 ºC) On request: class H (+180 ºC)"
Protection class
IP 00
Mechanical characteristics
Envelope
Conductor type: copper wire
Weight (kg)
9,1
Size (mm) width x height x depth
180 x 197 x 110 (mm)
Standards
Standards
UNE-EN 60289 , IEC 60076

DIMENSIONS

CONNECTIONS

VIDEOS

DOWNLOADS

Dimensions
Datasheet

ACCESORIES

TAMBIÉN TE PUEDE INTERESAR