Resistance transducer

CR2 Out 2

CR2 Out 2, Transducer Ohm

Code: M25642.CONSULTAR DISPONIBILIDAD

  • Output type: 2
  • Analog output: 4…20mA
  • Measure: 1 … 200 kΩ

INFORMATION

Description

CR2 transducers, measure a circuit resistance. The analog output signal is directly proportional to the measurement resistance.
The input circuit is protected against 250V RMS accidental voltage.

Do you need more information about this product?

If you have any questions, let's talk.

Talk to a specialist

SPECIFICATIONS

AC power supply
Nominal voltage
24/115/230/400 Vca (-15…+20%)
Frequency
40…90 Hz
Consumption
2,5 VA
AC power supply, insulation
Test voltage (kV)
2 kV RMS 50 Hz 1min
Pulse test (kV)
3 kV (1,2/50µs)
DC power supply
Nominal voltage
9-18 / 18-36 Vdc 36-72 / 90-140 Vdc
Consumption
2,5 VA
DC power supply, insulation
Test voltage (kV)
2 kV RMS 50Hz 1 min
Pulse test (kV)
3 kV (1,2/50µs)
Current measurement circuit
Phase current measurement
20 … 200 Ω / 2 … 20 kΩ
Measurement accuracy
Phase current measurement
0,2 % FS
Analogue outputs
Displaced output
0,2…2 V / 2…10 V / 4…20 mA
Current mode, nominal range
0…10, 20 mAac
Voltage mode: nominal output range
0…5, 10 Vac
Analogue inputs
Load impedance in voltage
> 500 Ω
Load impedance in current
< 500 Ω
Response time
< 300 ms (0…99 % Vn)
Ripple (effective RMS value)
< 0,5 %
Environmental characteristics
Working temperature
-10…+60 °C
Storage temperature
-40….+70 °C
Protection class
IP 20 (Terminals) IP 40 (case)
Standards
Standards
IEC 529, IEC 688, IEC 801, EN 50081-2, EN 50082-2, IEC 1010
Electrical safety, Maximum height (m)
2000
Mechanical characteristics
Weight (kg)
0,31
Size (mm) width x height x depth
40 x 72 x 110 (mm)

DIMENSIONS

CONNECTIONS

VIDEOS

DOWNLOADS

User's manual
Dimensions
Datasheet

ACCESORIES

TAMBIÉN TE PUEDE INTERESAR

Power transducer

CW / CY

Power transducer

Voltage transducer

CV

Voltage transducer